Recessed lighting can make a room feel larger and cleaner, or leave it looking like an airport runway. The difference is in the layout.
Spacing
A simple starting rule: divide the ceiling height by two to get the spacing in feet. With an eight-foot ceiling, lights go roughly four feet apart, and about two to three feet from the walls. Adjust for fixture brightness and beam angle.
Light the task, not the floor
In kitchens, center the lights over the edge of the countertop, not the walkway, so you are not working in your own shadow. In living rooms, wash the walls and leave the center softer.
Color temperature
- 2700K: warm, like incandescent; good for living rooms and bedrooms
- 3000K: slightly crisper; popular for kitchens and baths
- 3500K to 4000K: neutral white for garages, laundry and work areas
Keep one color temperature within a room. Selectable fixtures let you decide after installation.
Dimming
Put recessed lights on a compatible LED dimmer, and split a large room into zones.
Canless or housing?
Slim canless LED fixtures fit almost anywhere, including under joists. Traditional housings accept a wider choice of trims. Where the ceiling is insulated, fixtures must be rated for insulation contact and airtight.
Common mistakes
- Too many lights in a rigid grid
- Lights directly over where people sit or stand at a mirror
- Mixing color temperatures
- Skipping the dimmer
California's energy code
Permitted remodels generally require high-efficacy fixtures and dimmers or sensors in many rooms. A complete lighting installation plan accounts for that. Layer recessed lights with pendants, under-cabinet lighting and outdoor lighting for the best result.